teammatt3 — Tue, 27 Mar 2007 20:43:13 +0000

Sweet deal Greg thanks a lot.

Crap, no, the below isn't right, give me a minute to figure it out again

EDIT Again forgot to change a var name. Now it should work

I modified it to add in the Canadian Provinces. Here's how, and I have no idea if it's the best way to do it, but it works for me.

Make a new array

<?php
  $arProvinceData = array();
  $arProvinceData['AB'] = \"Alberta\";
  $arProvinceData['BC'] = \"British Columbia\";
  $arProvinceData['MB'] = \"Manitoba\";
  $arProvinceData['NB'] = \"New Brunswick\";
  $arProvinceData['NL'] = \"Newfoundland and Labrador\";
  $arProvinceData['NT'] = \"Northwest Territories\";
  $arProvinceData['NU'] = \"Nunavut\";
  $arProvinceData['ON'] = \"Ontario\";
  $arProvinceData['PE'] = \"Prince Edward Island\";
  $arProvinceData['QC'] = \"Québec\";
  $arProvinceData['SK'] = \"Saskatchewan\";
  $arProvinceData['YT'] = \"Yukon\";
?>

Change Greg's function a little by adding a few echos and another foreach loop. I want the optgroups

<?php
function selState($preSel = '', $selName = 'state', $selAtt = '', $optAtt = '', $curOptAtt  = '')
{
    if ($curOptAtt == '') 
    {
        $curOptAtt = $optAtt;
    }

    echo \"<select name=\\"\" . $selName . \"\\" \" . $selAtt . \">\n\";
    
    echo \"<optgroup label=\\"States\\">\";
    foreach ($GLOBALS['arStateData'] as $stAbbr => $stName)
    { 
        echo '<option value=\"' . $stAbbr . '\" ';
  
        if ($preSel == $stAbbr) 
        { 
            echo 'selected=\"selected\" ' . $curOptAtt;
        }
  
        else 
        { 
            echo $optAtt;
        }
  
        echo '>' . $stName . \"</option>\n\";
    }
    echo \"</optgroup>\";
    
    echo \"<optgroup label=\\"Provinces\\">\";
    foreach ($GLOBALS['arProvinceData'] as $prAbbr => $prName)
    {
        echo '<option value=\"' . $prAbbr . '\" ';
        
        if ($preSel == $prAbbr) 
        {
            echo 'selected=\"selected\" ' . $curOptAtt;
        }
        
        else
        {
            echo $optAtt;
        }
        echo '>' . $prName . \"</option>\n\";
    }
    
    echo \"</select>\n\";
}
?>

Thanks again Greg

Greg K — Tue, 27 Mar 2007 19:44:25 +0000

As states are something that can be used again and again, so I have an included file for this:

<?php
  $arStateData = array();
  $arStateData['AL'] = \"Alabama\";
  $arStateData['AK'] = \"Alaska\";
  $arStateData['AZ'] = \"Arizona\";
  $arStateData['AR'] = \"Arkansas\";
  $arStateData['CA'] = \"California\";
  $arStateData['CO'] = \"Colorado\";
  $arStateData['CT'] = \"Connecticut\";
  $arStateData['DC'] = \"District of Columbia\";
  $arStateData['FL'] = \"Florida\";
  $arStateData['GA'] = \"Georgia\";
  $arStateData['HI'] = \"Hawaii\";
  $arStateData['ID'] = \"Idaho\";
  $arStateData['IL'] = \"Illinois\";
  $arStateData['IN'] = \"Indiana\";
  $arStateData['IA'] = \"Iowa\";
  $arStateData['KS'] = \"Kansas\";
  $arStateData['KY'] = \"Kentucky\";
  $arStateData['LA'] = \"Louisiana\";
  $arStateData['ME'] = \"Maine\";
  $arStateData['MD'] = \"Maryland\";
  $arStateData['MA'] = \"Massachusetts\";
  $arStateData['MI'] = \"Michigan\";
  $arStateData['MN'] = \"Minnesota\";
  $arStateData['MS'] = \"Mississippi\";
  $arStateData['MO'] = \"Missouri\";
  $arStateData['MT'] = \"Montana\";
  $arStateData['NE'] = \"Nebraska\";
  $arStateData['NV'] = \"Nevada\";
  $arStateData['NH'] = \"New Hampshire\";
  $arStateData['NJ'] = \"New Jersey\";
  $arStateData['NM'] = \"New Mexico\";
  $arStateData['NY'] = \"New York\";
  $arStateData['NC'] = \"North Carolina\";
  $arStateData['ND'] = \"North Dakota\";
  $arStateData['OH'] = \"Ohio\";
  $arStateData['OK'] = \"Oklahoma\";
  $arStateData['OR'] = \"Oregon\";
  $arStateData['PA'] = \"Pennsylvania\";
  $arStateData['RI'] = \"Rhode Island\";
  $arStateData['SC'] = \"South Carolina\";
  $arStateData['SD'] = \"South Dakota\";
  $arStateData['TN'] = \"Tennessee\";
  $arStateData['TX'] = \"Texas\";
  $arStateData['UT'] = \"Utah\";
  $arStateData['VT'] = \"Vermont\";
  $arStateData['VA'] = \"Virginia\";
  $arStateData['WA'] = \"Washington\";
  $arStateData['WV'] = \"West Virginia\";
  $arStateData['WI'] = \"Wisconsin\";
  $arStateData['WY'] = \"Wyoming\";
  
  /**
   * Form Select of States
   *
   * @param string $preSel    The state that should be selected already
   * @param string $selName   The name to give the SELECT
   * @param string $selAtt    Any optional attributes for the SELECT tag (eg. class='whatever' )
   * @param string $optAtt    Any optional attributes for all OPTION tage 
   * @param string $curOptAtt Any optional attributes for the already selected OPTION
   */
  function selState($preSel = '', $selName = 'state', $selAtt = '', $optAtt = '', $curOptAtt  = '')
  {
    if ($curOptAtt == '') $curOptAtt = $optAtt;
    echo \"<select name=\\"\" . $selName . \"\\" \" . $selAtt . \">\n\";
    foreach ($GLOBALS['arStateData'] as $stAbbr => $stName)
    { 
      echo '<option value=\"' . $stAbbr . '\" ';
      if ($preSel == $stAbbr) 
        echo 'selected=\"selected\" ' . $curOptAtt;
      else 
        echo $optAtt;
      echo '>' . $stName . \"</option>\n\";
    }
    echo \"</select>\n\";
  }
?>

Then anytime I need it, I just add something like the following:

<?php
include_once('kgSelStates.inc');

selState('OH','mySate', 'class=\"states\"', 'class=\"items\"', 'class=\"theItem\"');
?>

See the comments before the function and the function defining line to see what the parameters are and their defaults, all are optional. Note that if you do not use the $curOptAtt parameter, it will default back to the value of $optAtt. (done in first line of function)

NOTE you will need to modify the function a bit to include the tag. Excluding the need for that, here is how you could use it based on your example:

<?php
selState($_SESSION['bill_state'],'bill_state')
?>

Also, note, that in the example above bill_state is enclosed in quotes as it should be, you left them out in your example. (see http://www.php.net/manual/en/language.types.array.php#language.types.array.donts )
-Greg