Simple please reinstall all

percyjackson — Tue, 12 Mar 2013 05:36:47 +0000

Simple please reinstall all your usb drive by going to the manage setting

It may be mostly due to any

nelsee — Sat, 25 Aug 2012 06:36:30 +0000

It may be mostly due to any error in the file try to reinstall the programme again that would be helpful.

prime wrote:Does anyone have

Allnsmth — Mon, 14 Feb 2011 06:18:16 +0000

prime wrote:

Does anyone have any ideas of what may suddenly stop USB working on my pc? a few days ago i lost my internet connection ( USB connection from my modem) i didnt realise why, until today when technical support at my Isp told me to switch the USB cable for the ethernet cable, and it worked, so now i know that my USB is causing problems, ive had a look in bios and USB controller is enabled there , when i unplug a USB cable and plug it back in i get a little bubble message saying :

"USB device not recognized
One of the USB devices attached to this computer has malfunctioned and windows does not recognize it"

Hi,
Try to reinstall your USB driver in your system ..it may be corrupted...!
When you connect your usb drive in your system any msg display like "Found new hardware"..then click on and proper install it.

some information is new for

optiplex — Sat, 12 Feb 2011 06:26:09 +0000

some information is new for me.

Reinstall your usb drivers.

jhonas — Sat, 08 Jan 2011 05:46:44 +0000

Reinstall your usb drivers.

pcmcia167 — Thu, 13 Oct 2005 14:24:03 +0000

It is possible that a software change messed up the USB stuff, go to Start > Run > Services.msc and make sure "Universal Plug and Play Device Host" is set to Automatic and that it is running. Since every PC is different, take a look around and see if there is anything else that may be causing it. Some services get disabled for software changes, patches, and just about any change, and they often don't get reset.

Good Luck!

prime — Sun, 04 Sep 2005 16:38:03 +0000

Thanks demonhale, i will give everything a good check and a thorough clean while its open, i will probably try and get hold of a compressed air canister tomorrow.

demonhale — Sun, 04 Sep 2005 15:58:15 +0000

What christhirst said is actually a long version of what I said you should check...

Anyways you can buy a compressed air canister and use this to blow off some dust...

For contact points on your MOBO use an a pencil eraser for the grimed contacts...

Lastly you could use a regular Paint Brush to dust off some remaining dusts...

wwwben — Sun, 04 Sep 2005 13:58:15 +0000

um yeah looks like you may have a hardware problem on your hands.. maybee buy a pci usb card.

prime — Sun, 04 Sep 2005 11:35:03 +0000

chrishirst - It may sound daft, but what would you recommend using to safely clear most of the dust from inside my case, obviously i wont do something silly like trying to blow over the motherboard etc and risking droplets of any kind, but just wondering generally how you would go about it?
Cotton buds maybe? or would that be a bad idea?